Question 1

A process of applying imagination to invent new products and services is called ________.

Accepted Answer

The answer of A process of applying imagination to invent...

Question 2

In a process map,a rectangle indicates

Accepted Answer

A)  a decision.
B)  work performed.
C)  materials leaving the process.
D)  data input.E) B) and D)
F) A) and D)

Question 3

The process which is the least labor intensive is

Accepted Answer

A)  Assembly line
B)  Job shop
C)  Batch
D)  ContinuousE) None of the above
F) B) and D)

Question 4

A process that represents a trade-off between mass assembly operations and job shops in terms of flexibility and production volumes is known as ________.

Accepted Answer

flexible m...

Question 5

Cellular manufacturing systems (choose two)
A)are usually U-shaped production lines.
B)allow parts to move in a variety of different directions.
C)support low-volume production more efficiently than in a job shop.
D)support mass assembly of products.

Accepted Answer

The answer of Cellular manufacturing systems (choose two)
A)are usually U-shaped...

Question 6

In a process map,a rectangle indicates that ________.

Accepted Answer

work is ac...

Question 7

A graphical representation of the life phases that a product experiences is known as ________.

Accepted Answer

The answer of A graphical representation of the life phases...

Question 8

Discuss the product-process matrix.What happens when a product is assigned to be made with the wrong process? Explain.

Accepted Answer

The product-process matrix matches the c...

Question 9

Use the information below to answer the following question(s) .
A production line operates for 450 minutes per day. Desired production volume is 80 units per day. Total task time to make the product is 56 minutes.
-What is the optimal cycle time?

Accepted Answer

A)  3) 6 minutes
B)  7) 25 minutes
C)  5) 625 minutes
D)  3) 875 minutesE) C) and D)
F) None of the above

Question 10

The selection and implementation of methods for producing products is known as product design.

Accepted Answer

A) True 
 B)False

Question 11

The first phase of the product life cycle is

Accepted Answer

A)  development.
B)  introduction.
C)  growth.
D)  decline.E) B) and C)
F) C) and D)

Question 12

The type of processing system which is used for highly standardized products is

Accepted Answer

A)  continuous flow.
B)  job shop.
C)  batch.
D)  project.E) All of the above
F) None of the above

Question 13

The process which requires high worker skill levels and worker training requirements is

Accepted Answer

A)  Assembly line
B)  Job shop
C)  Batch
D)  Continuous.E) B) and D)
F) A) and B)

Question 14

Quality Function Deployment (QFD)is also known as house of quality.

Accepted Answer

A) True 
 B)False

Question 15

In Muther's grid the Symbol "X" represents

Accepted Answer

A)  Absolutely necessary.
B)  Important.
C)  Unimportant.
D)  Undesirable.E) None of the above
F) B) and C)

Question 16

The model used in designing functional layouts where movement is minimized is called the ________.

Accepted Answer

The answer of The model used in designing functional layouts...

Question 17

An advantage of a production line process is

Accepted Answer

A)  the ability to produce highly customized products.
B)  the high degree of flexibility of the process.
C)  the low per unit cost of items produced on the line.
D)  the range of output typically produced on such a process.E) B) and C)
F) B) and D)

Question 18

The process of designing products that are complete changes from existing products is called continuous design.

Accepted Answer

A) True 
 B)False

Question 19

A schematic picture of a process using symbols is called a ________.

Accepted Answer

The answer of A schematic picture of a process using...

Question 20

A system of design that facilitates the making of products is known as

Accepted Answer

A)  Design for Reuse.
B)  Design for Reliability.
C)  Design for Manufacture.
D)  Design for Maintainability.E) A) and C)
F) A) and B)

Exam 3: Product and Process Design and Mapping

A process of applying imagination to invent new products and services is called ________.

Correct AnswerverifiedShow Answer

Cellular manufacturing systems (choose two) A)are usually U-shaped production lines. B)allow parts to move in a variety of different directions. C)support low-volume production more efficiently than in a job shop. D)support mass assembly of products.

Correct AnswerverifiedShow Answer

The first phase of the product life cycle is

Correct AnswerverifiedShow Answer

The process which requires high worker skill levels and worker training requirements is

Correct AnswerverifiedShow Answer

Quality Function Deployment (QFD)is also known as house of quality.

Correct AnswerverifiedShow Answer

A graphical representation of the life phases that a product experiences is known as ________.

Correct AnswerverifiedShow Answer

An advantage of a production line process is

Correct AnswerverifiedShow Answer

The process of designing products that are complete changes from existing products is called continuous design.

Correct AnswerverifiedShow Answer

In a process map,a rectangle indicates that ________.

Correct Answerverifiedwork is ac...View AnswerShow Answer

The process which is the least labor intensive is

Correct AnswerverifiedShow Answer

The model used in designing functional layouts where movement is minimized is called the ________.

Correct AnswerverifiedShow Answer

Discuss the product-process matrix.What happens when a product is assigned to be made with the wrong process? Explain.

Correct AnswerverifiedThe product-process matrix matches the c...View AnswerShow Answer

A system of design that facilitates the making of products is known as

Correct AnswerverifiedShow Answer

Use the information below to answer the following question(s) . A production line operates for 450 minutes per day. Desired production volume is 80 units per day. Total task time to make the product is 56 minutes. -What is the optimal cycle time?

Correct AnswerverifiedShow Answer

The type of processing system which is used for highly standardized products is

Correct AnswerverifiedShow Answer

The selection and implementation of methods for producing products is known as product design.

Correct AnswerverifiedShow Answer

A schematic picture of a process using symbols is called a ________.

Correct AnswerverifiedShow Answer

In Muther's grid the Symbol "X" represents

Correct AnswerverifiedShow Answer

A process that represents a trade-off between mass assembly operations and job shops in terms of flexibility and production volumes is known as ________.

Correct Answerverifiedflexible m...View AnswerShow Answer

In a process map,a rectangle indicates

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
work is ac...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
The product-process matrix matches the c...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
flexible m...
View Answer

Correct Answer
verified